Professional manufacturer respirator face ffp3 mask with valve

Professional manufacturer respirator face ffp3 mask with valve

Short Description:

Cup-shaped with valve mask
[Class]: FFP3 NR
[Packing Specifications]:20PCS/BOX
[Size] 15cm * 14.5cm*6cm
[Compliant to EN Standards]: EN 149:2001+A1:2009

  • :
  • Products Details


    •  ndications For Use】The protective mask is intended used for protection against solid and oily particulates, liquid and microorganisms such as coal dust, cement dust, acid fog, paint fog, oil smoke, oil mist, asphalt smoke, coke oven smoke etc. Single-use.
    • 【Limitations】Not suitable for working places where open flames exist (such as welding,casting,etc,); It is not suitable for professional protective use such as oxygen deficient, toxic gas environment. No medical use.
    • 【Checks prior to use】Please check whether the packaging is damaged, whether the mask body is damaged, deformed or has other obvious defects before use.
    • 【Transporting】When transporting this product use original packaging provided.
    • 【USE CAUTIONS】a)Please check fit of mask prior to use;
      b)It is unlikely that the requirements for leakage will be achieved if facial hair passes under the face seal;
      c)Please do not use the mask under low air quality condition, such as serious contaminants in air, oxygen deficiency;
      d)Do not use the mask in explosive atmosphere;
      e)After use, please discard the mask following local regulation;
      f)The mask is only for single use, do not use repeatedly.
      g) DO not use the same respirator for more than 8 hours continuous or intermittent, in dirty workplaces that could result in high filter loading.
      h) The maximum service time of this respirator is five(5) consecutive calendar days(including days of non-use),beginning from the first day of use.

      See information supplied by the manufacturer.


    STEP 1. Hold the respirator in hand with the nosepiece at your fingertips,allowing the headbands to hang freely below your hand.
    STEP 2. Press the respirator firmly against your face with the nosepiece on the bridge of your nose.
    STEP 3. Stretch and position the top band high on the back of the head.Stretch the bottom band over the head and position below your ears.
    STEP 4. Using both hands,mold nosepiece to the shape of your nose .
    STEP 5.TO test fit:a)Cuo both hands over the respirator being careful not to distrub position,and b) inhale vigorously.if air leaks around the edges, reposition the straps or adjust strap tension for better fit.
    Please carefully follow these fitting instructions during each use to achieve proper fit. Storage Condition: : The product should be stored in a well ventilated, dark and dry environment. Keep away from fire, pollutants and possible pollution sources. Also, the transport storage ‘s temperature: -5℃~50℃, relative humidity: < 75%RH.
    CompleteShelf-Life: The Protective Mask is valid for 3 years with the above storage condition.
    Production Batch Number: Printed on the bottom
    Production Date: Printer on the bottom
    Expiration Date: Printer on the bottom
    Manufacturer: Guangdong Fengluyuan Biopharmaceutical Technology CO., LTD
    Complete Address: Building 2nd, Guantai Biotechnology Cooperation And Breeding Center 1# Taoyuan Road, Taiwan Hi-tech Park, Songshan Lake, Dongguan Guangdong China.
    Phone: Anshun Health And Medical Technology Co.,Ltd.
    Complete Address: E6 building industry sience and technology park liangliu road xixiu district anshun city.Guizhou Province
    Phone: +8619129365734

  • Previous:
  • Next:

  • Sending Inquiring Message

    Write your message here and send it to us
    Sign Up

    Send your message to us: